Searching for a photo – Photo search/Photo scan
Scanning photo
(1) Set the POWER switch to VTR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo scan
(3) Press . or >.
2
SEARCH
MODE
3
To stop scanning
Press x.
Note
The photo search and photo scan work only for tapes recorded in the Digital8
If a tape has a blank portion in the recorded portions
The photo search and photo scan functions may not work correctly.
56
indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
Each photo is played back for about 5 seconds automatically.
PHOTO
SCAN
00
system.