Operating Instructions - Hisense HAWC09D User Manual

Operating Instructions

You can easily operate this air conditioner by pressing
the relevant button on the control panel as well as the
remote controller.
ON/OFF Button
The air conditioner will start operation or will stop operation
when this button is pressed.
MODE Button
Each time the MODE button is pressed, the operation
mode is changed in sequence:
COOLING FAN ONLY ENERGY SAVING COOLING
NOTE: After setting a mode, allow 3
minutes before switching to another mode.
FAN SPEED Button
Used to select the fan speed in sequence: auto
medium high.
TIMER Button
Used to set or cancel a timer operation.
When the unit is in operation, you can set the OFF TIMER.
When the unit is off, you can set the ON TIMER.
Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays
the remaining operating time for only 12 seconds,
the display then reverts to displaying the set temperature.
If the ON TIMER is set, the timer LED displays
the remaining time to left until turn on.
If you want to cancel the ON TIMER, press the TIMER
button again.
Buttons
Used to set the room temperature in COOLING mode or the time in TIMER mode.
NOTE: The temperature setting range is from 19 (66
SWING Button
Used to start or stop the vertical air vanes.
This Manual: http://www.manuallib.com/file/2617540
SWING
FAN
SPEED
TIMER
low
Indication symbols on the LED control panel:
Auto fan speed
Low fan speed
Medium fan speed
High fan speed
The above LED symbol lights when the relevant mode is in use.
) to 31 (88 ).
4
Control Panel
F
C
HR
ON/ OFF MODE
Cooling
HR
Fan only
Display set temp
Display set timer
Timer
Energy-saving
C