Installation Instructions; Prepare Air Conditioner For Installation; Window Air Conditioner Installation - Hisense AW0823CW1W Use And Installation Instructions

Attach Top Rail
1. Locate the bag of screws provided.
2. Place the top rail on the top of the air conditioner cabinet,
lining up the 4 holes in the top rail with the 4 holes on the
top of the air conditioner cabinet.
3. Using four
(10mm) screws, attach the top rail to the
3/8"
air conditioner cabinet.
NOTE: The top rail had been attached by manufacturer.
(Models: 12K\14K BTU cooling only)
Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the
air conditioner in window.
1. Slide the Side curtain directly into the cabinet. Slide
the Side curtain down.
A Side curtain .
B. Air conditioner cabinet
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner .
Failure to do so can result in back or other injury .

INSTALLATION INSTRUCTIONS

Prepare Air Conditioner for Installation

A. 3 /8" screws
B. Top rail
A
B

Window Air Conditioner Installation

2. Insert top and then bottom of right-hand curtain housing in
top and bottom curtain rails on air conditioner.
Back View
A
Bottom View
A. Curtain housing
C. Curtain bottom rail on air conditioner
3. Slide the curtain housing into the channels as far as it could go.
4. Repeat steps above for the left-hand curtain.
Attach Adhesive Seal
1. Cut the adhesive seal to the width of the lower window sash.
2. Remove the backing from the seal and attach the seal to the
bottom of the lower window sash.
A
A. Lower window sash
B Adhesive seal
NOTES:
Handle air conditioner gently.
■
Be sure your air conditioner does not fall out of the opening
■
during installation or removal.
Do not block the louvers in the front panel.
■
Do not block the louvers on the outside of the air conditioner.
■
6
B
.
A Curtain housing
B. Curtain top rail
A
C
.
B