L2Tp - D-Link AC750 User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.

L2TP:

Select Dynamic (most common) or Static. Select Static if your ISP
assigned you the IP address, subnet mask, gateway, and DNS server
addresses.
L2TP IP Address:
Enter the IP address (Static L2TP only).
L2TP Subnet Mask:
Enter the Primary and Secondary DNS Server Addresses (Static L2TP
only).
L2TP Gateway:
Enter the Gateway IP Address provided by your ISP.
Primary DNS
The DNS server information will be supplied by your ISP (Internet
Server:
Service Provider.)
MAC Address:
The default MAC Address is set to the WAN's physical interface MAC
address on the Broadband Router.
Copy Your PC's You can click the Copy Your PC's MAC Address button to copy the
MAC Address:
MAC address of the Ethernet adapter installed in your computer to
the router.
Server IP: Enter the Server IP provided by your ISP (optional).
User Name:
Enter your L2TP account name.
Password:
Enter your L2TP password and then retype the password in the
Confirm Password box.
Maximum Idle
Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
MTU:
Maximum Transmission Unit - You may need to change the MTU for
optimal performance with your specific ISP.
Connection Mode
Select Always on for most ISPs or select Manual or Connection
Select:
on demand.
D-Link DIR-813 User Manual
L2TP
19