Advanced Wireless 5Ghz - D-Link AC750 User Manual

Section 3 - Configuration
This section allows you to change the behavior of the 5GHz wireless radio from the standard settings. Please be aware that any changes to the
factory default settings may adversely affect the behavior of your network.
Transmit Power:
Set the transmit power of the antennas.
Wireless Mode:
Select one of the following:
5G A - Select if all of your wireless clients are 802.11a.
5G N - Select if all of your wireless clients are 802.11n.
5G A + N - Select if you are using both 802.11n and 802.11a wireless
clients.
5G AC - Select only if all of your wireless clients are 802.11ac.
5G N + AC - Select if you are using both 802.11n and 802.11ac
wireless clients.
5G A + N + AC - Select if you are using 802.11ac, 802.11n, and
802.11a wireless clients (most common mode).
Band Width: Select the Band Width (also known as Channel Width):
20MHz - Select if you are not using any 802.11n wireless clients.
20/40MHz (Auto) - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20/40/80MHz (Auto) - Select if you are using 802.11ac, 802.11n, and non-802.11n wireless devices. This option is only available when
the 802.11 Mode is set to Mixed 802.11ac.
20/40MHz Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz and there
Coexist:
is another wireless network's channel over-lapping and causing interference, the router will automatically change to 20MHz.
D-Link DIR-813 User Manual

Advanced Wireless 5GHz

34