Port Forwarding - D-Link AC750 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Enable:
Check the box to enabled the rule.
Name:
Enter a name for the rule.
Application
You may select a pre-defined rule from the drop-down menu.
Name: Select a rule and then click << to populate the required fields.
IP Address:
Enter the IP address of the computer on your local network
that you want to allow the incoming service to.
Computer
Select a computer or device on your network from the drop-
Name: down menu and then click << to populate the required fields.
Start Port/ Enter the port or range of ports that you want to open. If you
End Port: want to open one port, enter the same port in both boxes.
In most cases the Public and Private ports will be exactly the
same.
Traffic Type: Select TCP, UDP, or Any.
D-Link DIR-813 User Manual

Port Forwarding

27