CONTENTS Safety information Daily use Safety instructions Hints and tips Product description Care and cleaning Control panel Technical Data Programme Chart Troubleshooting Consumption values Installation Options Product Fiche Before first use Subject to change without notice. SAFETY INFORMATION This machine is only for domestic use and is designed to wash, rinse and spin machine-washable textiles.
farm houses; staff kitchen areas in shops, offices and – other working environments; by clients in hotels, motels, bed & breakfast and other – residential type environments. Do not change the specification of this appliance. • Obey the maximum load volume of 6 kg (refer to the •...
• Make sure that the electrical information • Obey the safety instructions on the on the rating plate agrees with the detergent packaging. power supply. If not, contact an • Do not put flammable products or items electrician. that are wet with flammable products in, •...
Programme Maximum Programme description (Type of load and soil lev- Temperature load, Maxi- range mum spin speed Máchání 6 kg To rinse and spin the laundry. All fabrics. Cold 1200 rpm 1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme»...
Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) Wool/Handwash 30 0,36 °C Standard cotton programmes Standard 60 °C 1,03 cotton Standard 60 °C 0,78 cotton Standard 40 °C 0,60 cotton 1) At the end of spin phase.
Use this option for items with light soil or • The related indicator comes on. items to refresh. • The washing programme stops with the water in the drum. The drum turns The related indicator comes on. regularly to prevent the laundry creases. •...
• The indicator of the button flashes. • The display shows the programme duration. 2. If necessary, change the spin speed or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message CAUTION! Before you close the Starting a programme without...
Cancelling a running To cancel the Delay Start option: programme a. Press the button to set the appliance to pause. The indicator of 1. Turn the programme knob to position button flashes. Vyp to cancel the programme and to b. Press the button Delay Start until deactivate the appliance.
To drain the water: appliance, the energy saving status activates. The energy saving status 1. Set a "Drain" or a "Spin" programme. If decreases the energy consumption when necessary, decrease the spin speed. the appliance is on the standby: 2. Press the button .
Water hardness • If your appliance has not the detergent dispenser with the flap device, add the If the water hardness in your area is high or liquid detergents with a dosing ball moderate, we recommend that you use a (supplied by the detergent's water softener for washing machines.
Page 14
Cleaning the detergent dispenser Cleaning the inlet hose and the valve filter 90˚...
Cleaning the drain filter CLACK CLACK Frost precautions 4. Set the Drain programme and let it operate until the end of the cycle. If the appliance is installed in an area where 5. Turn the programme knob to Stop to the temperature can be less than 0 °C, disconnect the appliance from the remove the remaining water from the inlet...
Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water Water supply Maximum Load Cotton 6 kg Energy Efficiency Class Spin Speed Maximum 1200 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. TROUBLESHOOTING •...
Page 17
Problem Possible solution The appliance does not • Make sure that the water tap is open. fill with water properly. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. •...
After the check, activate the appliance. The If the display shows other alarm codes. programme continues from the point of Deactivate and activate the appliance. If the interruption. problem continues, contact the Service. If the problem occurs again, contact the Authorised Service Centre.
Positioning Water supply 3/4” 1/2” 3/4” 3/4” Drainage min.600 mm max.1000 mm PRODUCT FICHE Trade Mark Philco Model PLD 1261-5TL Rated capacity (cotton) Energy efficiency class...
kWh/ Weighted annual energy consumption year Energy consumption of the standard 60 °C cotton programme 1,03 (full load) Energy consumption of the standard 60 °C cotton programme 0,78 (partial load) Energy consumption of the standard 40 °C cotton programme 0,60 (partial load) Power consumption - off mode 0,10...
Need help?
Do you have a question about the PLD 1261-5TL and is the answer not in the manual?
Questions and answers