PART 1: SAFETY INSTRUCTIONS THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND BY PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTIONS CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND IF THEY UNDERSTAND THE HAZARDS INVOLVED.
Page 5
THIS APPLIANCE IS INTENDED TO BE USED ONLY IN HOUSEHOLDS AND NOT IN SIMILAR PREMISES, SUCH AS: - KITCHENETTES IN SHOPS, OFFICES AND OTHER WORKPLACES; – APPLIANCES USED APPLIANCES USED BY GUESTS IN HOTELS, MOTELS, AND OTHER ACCOMMODATION FACILITIES; – APPLIANCES USED IN BED AND BREAKFAST FACILITIES; –...
Page 6
- IF THE SUPPLY CORD GETS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON. - THE APPLIANCE SHOULD BE CONNECTED TO THE WATER SUPPLY AND DRAIN USING NEW HOSES, NOT USING HOSES THAT HAVE ALREADY BEEN USED.
Page 7
APPLIANCE INSTALLATION - THIS APPLIANCE IS INTENDED FOR INTERIOR USE ONLY. - THIS APPLIANCE IS INTENDED TO BE BUILT-IN. - THE ELECTRIC OUTLET THAT THE POWER CORD IS CONNECTED TO MUST BE EASILY ACCESSIBLE AFTER THE APPLIANCE HAS BEEN INSTALLED. - REMOVE ALL PACKAGING MATERIALS AND SAFETY TRANSPORT BOLTS BEFORE USING THE APPLIANCE.
p Safety Instructions For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. Explanation of the symbols: Warning! This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided.
p Installation Installation area Warning! • Stability is important to prevent the product from wandering! Make sure the machine is standing leveled and stable. • Make sure that the product does not stand onto the power cord. • Make sure to maintain the minimum distances from the walls as shown in the picture. Before installing the machine, the location characterized as follows shall be selected: 1. Rigid, dry, and level surface. 2.
Page 11
Levelling the washing machine Warning! • The lock nuts on all four feet must be screwed tightly against the housing. 1. Loosen the lock nut. 2. Turn the foot until it reaches the floor. 3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady. Connect the water supply hose Warning! To prevent leakage or water damage, follow the instructions in this chapter...
PART 3: OPERATIONS p Quick Start Caution! • Before washing, please make sure the washing machine is installed properly. • Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, start the Cotton program at 90°C without laundry and detergent.
p Before Each Washing • The ambient temperature of the washing machine should be 5-40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use. • Please check your laundry care labels and the detergent use instructions before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.
p Detergent Dispenser Pre wash Main wash Softener Release button to pull out the dispenser Caution! • Detergent only need to be added in “compartment I “after selecting pre-wash function. Programme Programme Cotton(Cold) Rinse&Spin Cotton (20°C) Heat Wash 90°C Cotton (40°C) Mix (60°C) Cotton (60°C) ...
Page 16
Detergent Recommendation Recommended washing Wash cycles Washing temp. Type of laundry and textile detergent Heavy-duty detergent with White laundry made from boil- bleaching agents and optical Cotton, ECO 40-60 30/40/60 proof cotton or linen brighteners Colour detergent without Coloured laundry made from bleaching agent and optical Cotton, ECO 40-60 Cold/20/30/40 cotton or linen brighteners Coloured laundry made from...
p Control Panel 1 On/Off 4 Programmes Turn the appliance on and off. Available according to the laundry type. 2 Start/Pause 5 Display Start or pause your programme. The display shows settings, estimated remaining time, options and status messages. 3 Option This allows you to select additional functions and will light when selected.
1) The highest temperature reached by the laundry in the wash cycle for at least 5 minutes. 2) Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved. 3) The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the regulation (EU) 2019/2023.
Page 28
Pre Wash: The Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises to surface of the clothes;You need to put detergent into the Case (I) when select Delay: Delay function can be set with this button, the delaying time is 0-24H. Speed: It can be set the spin speed to press the button repeatedly. Extra Rinse: The laundry will undergo extra rinse once after you select it.
PART 4: MAINTENANCE p Cleaning and Care Warning! • Always unplug the appliance and close the water tap before cleaning and maintenance. Cleaning the Cabinet Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use a cloth to wipe it off immediately. Never use sharp items to clean the appliance. Caution! • Never use abrasive or caustic agents. formic acids or its diluted solvents or similar substances, like alcohol or chemical products. Cleaning the Drum Any rust stains left inside the drum by metal articles must be removed immediately using chlorine-free detergents. Never use steel wool for cleaning the drum!
Page 30
Cleaning the Inlet Filter Note! • Diminishing water flow is a sign that the filter need to be cleaned. 1. Close the tap and remove the water supply hose from it. 2. Clean the filter with a brush. 3. Unscrew the water supply hose from the backside of the machine. Pull out the filter with long nose pliers. 4.
Page 31
Note! • Do not use abrasive or caustic agents to clean plastic parts. • Clean the detergent dispenser every 3 months to ensure the normal operation of the appliance. Cleaning the Drain Pump Filter Warning! • Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before cleaning the drain pump filter. • Be careful of hot water. Allow the water to cool down. Risk of scalding! • Clean the filter periodically every 3 months to ensure the normal operation of the appliance. Open the Service filter Open the filter by Remove extraneous Close the lower cover turning to the counter matter clockwise Caution!
p Trouble Shooting Whenever there is a problem with the appliance, check if you can solve it following the tables below. If the problem persists, please contact the customer service. Description Reason Solution Washing machine Restart after the door is closed. Door is not closed properly.
Power Supply 220 - 240V ~, 50Hz MAX. Current 10 A Standard Water Pressure 0.05MPa~1MPa Washing Dimension Model Net Weight Rated Power Capacity (W/D/H) mm PLDS 106 DG 6.0kg 595/400/850 52kg 2050W PLD 147 EG 7.0kg 595/495/850 60kg 2050W PLDS 127 DG 7.0kg 595/400/850...
PART 5: PRODUCT INFORMATION SHEET Product Information Sheet COMMISSION DELEGATED REGULATION (EU) 2019/2016 Supplier's name or trademark: PHILCO Supplier's address: Černokostelecká 2111, 10000 Prague, CZ Model identifier: PLDS 106 DG General product parameters: Washing Machine Parameter Value Parameter Value Height...
Page 38
Product Information Sheet COMMISSION DELEGATED REGULATION (EU) 2019/2016 Supplier's name or trademark: PHILCO Supplier's address: Černokostelecká 2111, 10000 Prague, CZ Model identifier: PLDS 127 DG General product parameters: Washing Machine Parameter Value Parameter Value Height Rated capacity Dimensions in cm...
Page 39
Additional information: Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 is found: www.philco.cz * A (highest efficiency) to G (lowest efficiency) 1) The actual energy consumption will depend on how the appliance is used.
Page 40
When contacting our authorized service, have the model designation, serial number and defect description available. To download documents, visit www.philco.cz. To report a defect and obtain additional service information, visit https://philco.cz/podpora-a-servis. Subject to change without notice.
Page 41
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
Page 44
Výrobce/Manufacturer: Fast ČR, a.s. U Sanitasu 1621 Říčany 251 01, CZECH REPUBLIC Distributor: FAST PLUS, a.s. Na pántoch 18 831 06 Bratislava, SLOVAKIA Distributor: FAST POLAND Sp. z o. o. Kwietniowa 36 05-090 Wypędy, POLAND Distributor: FAST HUNGARY Kft. H-2310 Szigetszentmiklós Kántor utca 10, HUNGARY is a pending or registered trademark of Electrolux Home Products, Inc.