Replacing the control-buttons
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the control-buttons board cable into the connector on the control-
buttons board and close the latch to secure the cable.
NOTE:
You must correctly align the control-buttons board to ensure that
it is properly secured to the display-assembly base. For correct orientation,
see step 1 in
2
Slide the control-buttons board into the slot on the display-assembly base
until the securing clips lock in place.
Post-requisites
1
Replace the
back
2
Replace the stand.
computer. After working inside your computer,
After working inside your
"Removing the control-buttons
cover.
Replacing the control-buttons board
board
computer. For more safety
board".
19
52