WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the stand.
2
Remove the
back
3
Remove the
system-board
Procedure
1
Disconnect the speaker cable from the system board.
2
Note the routing of the speaker cable and the position of the rubber
grommets on the computer bezel.
3
Remove the speaker cable from the routing guides.
4
Remove the screw that secures the tape to the display-assembly base.
5
Peel off the tape that secures the speaker cable to the display-assembly base.
6
Lift the speakers, along with the speaker cable, off the display assembly.
Removing the speakers
computer. After working inside your computer,
After working inside your
cover.
shield.
computer. For more safety
Removing the speakers
30
69