Replacing The Display Assembly; Procedure - Dell Inspiron 22 3000 Series Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

• Post-requisites
Procedure
1 Replace the rubber
2 Slide the tabs on the display assembly into the slots on the display-assembly
base.
3 Replace the display-assembly base on the display assembly.
4 Replace the screws that secure the display-assembly base to the display
assembly.
5 Route the optical-drive data cable, touch-board cable, display-backlight cable,
hard-drive cables and control-buttons board cable through the routing guides
on the display-assembly base.
6 Connect the touch-screen board cable and display-panel power cable to their
connectors on the display-assembly base.
7 Align the screw holes on the VESA-mount bracket with the screw holes on the
display-assembly base.
8 Replace the screws that secure the VESA-mount bracket to the display-
assembly base.
computer. After working inside your computer,
After working inside your
feet.
computer. For more safety
Replacing the display assembly
35
82