WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Using the alignment posts and rubber grommets on the display-assembly
base, place the speakers on the display-assembly base.
2
Route the speaker cable through the routing guides on the display-assembly
base.
3
Adhere the tape that secures the speaker cable to the display-assembly base.
4
Replace the screw that secures the tape to the display-assembly base.
5
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
system-board
2
Replace the
back
3
Replace the stand.
Replacing the speakers
computer. After working inside your computer,
After working inside your
shield.
cover.
computer. For more safety
Replacing the speakers
31
71