WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
Align the tabs on the back cover with the slots on the display-assembly base and
snap the back cover into place.
NOTE:
Make sure that no cables are caught between the back cover and the
display-assembly base.
Post-requisites
Replace the stand.
Replacing the back cover
computer. After working inside your computer,
After working inside your
computer. For more safety
Replacing the back cover
7
29