Replacing The Control-Buttons Board; Procedure; Post-Requisites - Dell Inspiron 24 5000 Service Manual

GUID-7F36DE85-2CD8-46A6-8EA2-D030494EF2FD
Replacing the control-buttons
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-ECD3B5D4-AF82-421F-BEE3-588FF7D348CA

Procedure

1 Align the buttons on the control-buttons board with the buttons on the display
bezel.
2 Slide the control-buttons board cable into the connector on the control-buttons
board and close the latch to secure the cable.
3 Slide the control-buttons board into the slot on the display bezel till the securing
clips lock in place.
4 Route the control-buttons board cable through the routing guides and adhere
the control-buttons board cable to the middle-frame base.
GUID-5BD24CA8-22A1-42D3-8F87-E7A01ABCBAF4

Post-requisites

1 Replace the back
2 Replace the stand.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
69