Replacing The Optical Drive; Procedure; Post-Requisites - Dell Inspiron 22 3000 Series Service Manual

Replacing the optical drive

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Align the screw holes on the optical-drive bracket with the screw holes on the
optical drive.
NOTE: You must correctly align the optical-drive bracket to ensure that
the optical drive can be properly secured to the computer. For correct
orientation, see step 6 in
2 Replace the screws that secure the optical-drive bracket to the optical drive.
3 Carefully push the optical-drive bezel into the optical drive.
4 Connect the optical-drive cable to the optical drive.
5 Place the optical-drive bracket on the display-assembly base.
6 Replace the screw that secures the optical-drive bracket to the display-
assembly base.
Post-requisites
1 Replace the back
2 Replace the stand.
computer. After working inside your computer,
After working inside your
"Removing the optical
cover.
computer. For more safety
drive".
Replacing the optical drive
9
33