Replacing The Control-Buttons Board; Procedure; Post-Requisites - Dell Inspiron 22 3000 Series Service Manual

Replacing the control-buttons
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the control-buttons board cable into the connector on the control-
buttons board and close the latch to secure the cable.
NOTE: You must correctly align the control-buttons board to
ensure that it is properly secured to the display-assembly base. For
correct orientation, see step 1 in
board".
2 Slide the control-buttons board into the slot on the display-assembly
base until the securing clips lock in place.

Post-requisites

1 Replace the back
2 Replace the stand.
computer. After working inside your
cover.
After working inside your
"Removing the control-buttons
51