Star SST-20 Installation And Operation Instructions Manual page 4

CLEANING
To remove the drawer for cleaning:
1. Pull the drawer out until it stops.
2. Remove the interior pan.
3. Grasp the drawer assembly with both hands.
4. Lift the drawer in an upward direction while slowly pulling out.
This will disengage the drawer from the drawer stops. To re-install the drawer, reverse the procedure.
The unit should be cleaned with a damp cloth using a mild detergent or non abrasive cleaner.
Clean the entire unit daily to ensure long life and satisfactory performance as well as to maintain an
attractive appearance. Do not clean with water jet equipment.
MAINTENANCE AND REPAIRS
Contact the factory, a service representative, or a local service company for service or required
maintenance.
4