Removing The Camera Board; Replacing The Camera Board - Dell Inspiron 1320 Service Manual

Back to Contents Page
Camera Board
Dell™ Inspiron™ 1320 Service Manual
Removing the Camera Board
Replacing the Camera Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Camera Board
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the center control cover (see
4. Remove the keyboard (see
5. Remove the hard drive (see
6. Remove the palm rest (see
7. Remove the display assembly (see
8. Remove the display bezel (see
9. Disconnect the camera cable from the connector on the camera board.
10. Remove the screw that secures the camera board to the display cover.
1 camera board
3 camera cable connector
11. Remove the camera board off the display cover.
Replacing the Camera Board
1. Align the camera board over the screw hole.
Begin.
Battery).
Removing the Center Control
Removing the Keyboard).
Removing the Hard Drive).
Removing the Palm Rest).
Removing the Display Assembly).
Removing the Display Bezel).
2
Removing the
Cover).
screw
Battery) before working inside the