Entering The Service Tag In The Bios - Dell Inspiron 1320 Service Manual

9. Replace the palm rest (see
10. Replace the hard drive (see
11. Replace the keyboard (see
12. Replace the center control cover (see
13. Replace the coin-cell battery (see
14. Replace the Mini-Card (see
15. Replace the memory modules (see
16. Replace the module cover (see
17. Replace the battery (see Replacing the
18. Replace any cards removed from the ExpressCard slot.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
19. Turn on the computer.
NOTE: After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
20. Enter the service tag (see Entering the Service Tag in the
Entering the Service Tag in the BIOS
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2. Turn on the computer.
3. Press <F2> during POST to enter the system setup program.
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
Replacing the Palm Rest).
Replacing the Hard Drive).
Replacing the Keyboard).
Replacing the Center Control
Replacing the Coin-Cell Battery).
Replacing the Mini-Card).
Replacing the Memory Module(s)).
Replacing the Module Cover).
Battery).
BIOS).
Cover).