Selecting The Front Speakers - Sony STR-DH770 Operating Instructions Manual

Selecting the front speakers

SPEAKERS
Press SPEAKERS on the receiver repeatedly.
The indicators on the display panel shows
which set of terminals are selected.
 SP A: Speakers connected to the SPEAKERS
FRONT A terminals.
 SP B*: Speakers connected to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT HIGH/FRONT B terminals.
 SP A B*: Speakers connected to both the
SPEAKERS FRONT A and SPEAKERS
SURROUND BACK/BI-AMP/FRONT HIGH/
FRONT B terminals (parallel connection).
 (None): "SPK OFF" appears on the display
panel. No audio signals are output from any
speaker terminals.
* To select "SP B" or "SP A B", set [Surround Back
Speakers Assign] in [Speaker Setting] to [Front B
Speakers].
Note
This setting is not available when headphones are
connected.
1: Selecting the language
Press / to select the language,
then press .
2: Selecting the Surround Back
Speakers Assign
Press / to select the Surround
Back Speakers Assign, then press
.
Select the Surround Back Speakers Assign
according to the speaker configuration that
you are using (page 16 – 20).
3: Performing the Auto
Calibration
1
Press / to select [Start], then
press .
Tip
If you wish to perform Auto Calibration later,
select [Skip].
29 GB