Sony STR-DH770 Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. STR-DH770
  6. Manual

Sony STR-DH770 Manual

Hide thumbs Also See for STR-DH770:
Table of Contents

Advertisement

Quick Links

MULTI CHANNEL AV RECEIVER
Parts and Controls
Receiver
Front panel (upper section) [1]
Front panel (lower section) [2]
Power indicator [3]
Indicators on the display panel [4]
Rear panel [5]
Remote control
Remote control (upper section) [6]
Remote control (lower section) [7]
Preparation
1. Installing speakers
Names and functions of speakers [8]
Installing 5.1-channel speaker system [9]
Installing 7.1-channel speaker system using surround back speakers [10]
Installing 7.1-channel speaker system using front high speakers [11]
Installing 5.1-channel speaker system with bi-amplifier connection [12]
Installing 5.1-channel speaker system with front B speaker connection [13]
Speaker configuration and speaker pattern settings [14]
2. Connecting speakers
Connecting 5.1-channel speaker system [15]
Connecting 7.1-channel speaker system using surround back speakers [16]
Connecting 7.1-channel speaker system using front high speakers [17]
Connecting 5.1-channel speaker system with bi-amplifier connection [18]
Connecting 5.1-channel speaker system with front B speaker connection [19]
3. Connecting a TV
Connecting a TV [20]
Connecting a 4K TV [21]
Notes on connecting cables [22]
About HDMI connections [23]
4. Connecting audio-visual devices and the antennas (aerials)
Connecting devices with HDMI jacks [24]
Connecting devices with jacks other than HDMI jacks [25]
Connecting a USB device [26]
STR-DH770

Advertisement

Table of Contents
loading

Related Manuals for Sony STR-DH770

Summary of Contents for Sony STR-DH770

  • Page 1 STR-DH770 MULTI CHANNEL AV RECEIVER Parts and Controls Receiver Front panel (upper section) [1] Front panel (lower section) [2] Power indicator [3] Indicators on the display panel [4] Rear panel [5] Remote control Remote control (upper section) [6] Remote control (lower section) [7] Preparation 1.

  • Page 2: Table Of Contents

    Connecting the antenna (aerial) [27] Digital audio formats supported by the receiver [28] Notes on connecting cables [29] About HDMI connections [30] 5. Turning on the receiver/preparing the remote control Inserting batteries into the remote control [31] Turning on the receiver [32] 6.

  • Page 3: Power

    Tuning to a station directly [55] Receiving RDS broadcasts (for European and Asia-Pacific models only) [56] Enjoying sound effects Selecting a sound field [57] Relations between sound fields and speaker outputs [58] Resetting sound fields to the default settings [59] Enjoying clear sound at a low volume level (NIGHT MODE) [60] Adjusting the equalizer (EQ) [61] Enjoying high-fidelity sound (Pure Direct) [62]...

  • Page 4: Setting Up The Receiver Using Easy

    Switching between digital and analog audio (INPUT MODE) [80] Using other audio input jacks (A. ASSIGN) [81] Using the sleep timer Using the sleep timer [82] Checking information on the receiver Viewing information on the display panel [83] Adjusting Settings Using the menu on the display panel Operating the receiver with the menu on the display panel [84] Viewing information on the display panel [85]...
  • Page 5 Changing the name for each input (NAME IN) [105] Using other audio input jacks (A. ASSIGN) [106] Surround Settings Selecting the HD-D.C.S. effect type (HD-D.C.S. TYP) [107] Equalizer Settings Adjusting the equalizer (EQ) [108] Tuner Settings Setting the FM station receiving mode (FM MODE) [109] Naming preset stations (NAME IN) [110] Audio Settings Enjoying clear sound at a low volume level (NIGHT MODE) [111]...
  • Page 6 List of messages after Auto Calibration measurements [128] USB message list [129] General The receiver is turned off automatically. [130] Cannot find an available input when connecting several digital devices. [131] The receiver does not turn on even when the TV is turned on. [132] The receiver turns off when the TV is turned off.
  • Page 7 The RDS information that you want does not appear (for European and Asia- Pacific models only). [161] iPhone/iPod The sound is distorted. [162] USB devices Are you using a compatible USB device? [163] There is noise, skipping, or distorted sound. [164] A USB device is not recognized.

  • Page 8: Power Indicator

    (power) Power indicator SPEAKERS TUNING MODE, TUNING +/– Press to operate the FM tuner. Press TUNING +/– to scan a station. NFC sensor 2CH/MULTI , MOVIE, MUSIC Display panel NIGHT MODE Activates the Night Mode function which allows you to retain a theater-like environment at low volume levels.

  • Page 9: Indicators On The Display

    Green: The receiver is turned on. Amber: The receiver is in standby mode, and you have set one of the following: [CTRL HDMI] is set to [CTRL ON]. [STBY THRU] is set to [ON] or [AUTO]. [BT STANDBY] is set to [STBY ON]. (*) Indicator turns off when the receiver is in standby mode and: [CTRL HDMI] is set to [CTRL OFF].

  • Page 10: Rear

    SLEEP Lights up when the sleep timer is activated. Lights up when a BLUETOOTH device is connected. Flashes while pairing and connecting. Speaker system indicator When playing a Dolby Digital or DTS format disc, make sure that you have completed the digital connections and [<INPUT>] - [INPUT MODE] is not set to [ANALOG] on the display panel.
  • Page 11 Select the device you want to use. When you press any of the input buttons, the receiver turns on. The input buttons are pre- assigned to automatically control Sony devices when you select them. PURE DIRECT Activates the Pure Direct function which allows you to enjoy higher-fidelity sound from all inputs.

  • Page 12: Names And Functions Of

    AMP MENU Displays the menu on the display panel to operate the receiver. Press to select the menu items. Then press to enter the selection. PAIRING Sets the receiver to the BLUETOOTH pairing mode. HOME Displays the home menu on the TV screen. (*), Skip, play, pause, stop operation.

  • Page 13: Installing 5.1-Channel Speaker

    Abbreviations Speaker used in Functions name illustrations Front left speaker Produces stereo sounds from front left/right channels. Front right speaker Center Produces vocal sounds from center channel. speaker Surround left speaker Produces sounds from surround left/right channels. Surround right speaker Surround back left speaker Produces sounds from surround back left/right...

  • Page 14: Installing 7.1-Channel Speaker System Using Surround Back

    30° 100° - 120° Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [10] Preparation 1. Installing speakers Installing 7.1-channel speaker system using surround back speakers You can enjoy high-fidelity reproduction of recorded sound from DVD or Blu-ray Disc software in 6.1-channel or 7.1-channel format.

  • Page 15: Connecting A

    [11] Preparation 1. Installing speakers Installing 7.1-channel speaker system using front high speakers You can enjoy vertical sound effects by connecting additional two front high speakers. 30° 100° - 120° 30° - 45° H: Left front high speaker or right front high speaker F: Front left speaker or front right speaker Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want.

  • Page 16: Installing 5.1-Channel Speaker System With Front B Speaker

    30° 100° - 120° Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [13] Preparation 1. Installing speakers Installing 5.1-channel speaker system with front B speaker connection If you have an additional front speaker system, connect it to SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals.
  • Page 17 Select the speaker pattern from the [<SPEAKER>] menu on the display panel according to the speaker configuration which you are using. [SB ASSIGN] setting on Speaker pattern to be selected in Speaker configuration the display panel (*) the [<SPEAKER>] menu 5.1-channel [OFF] [3/2.1]...

  • Page 18: Connecting 7.1-Channel Speaker System Using Surround Back

    [16] Preparation 2. Connecting speakers Connecting 7.1-channel speaker system using surround back speakers Connect each speaker as illustrated below. Before connecting cables, be sure to disconnect the AC power cord (mains lead). For details on how to connect speaker cables to the receiver, see “How to connect speaker cables.”...

  • Page 19: Connecting 5.1-Channel Speaker

    Monaural audio cable (not supplied) Speaker cable (not supplied) After you have connected the front high speakers, set [Speaker Setting] - [Surround Back Speakers Assign] to [Front High Speakers] from the home menu. [18] Preparation 2. Connecting speakers Connecting 5.1-channel speaker system with bi- amplifier connection You can enhance the sound quality of the front speakers by connecting different amplifiers to both a tweeter and a woofer, using bi-amplifier connection.

  • Page 20: Connecting 5.1-Channel Speaker System With Front B Speaker

    Connecting speakers other than front speakers Monaural audio cable (not supplied) Speaker cable (not supplied) After you have made the bi-amplifier connection, set [Speaker Setting] - [Surround Back Speakers Assign] to [Bi-Amplifier Speakers] from the home menu. Hint You can also set the assignment for the surround back speaker terminals on the display panel. Set [SB ASSIGN] to [BI-AMP] in the [<SPEAKER>] menu.

  • Page 21: Using The Menu On The Tv

    HDMI cable (not supplied) Note Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.
  • Page 22 HDMI cable (not supplied) Note Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.

  • Page 23: Connecting A 4K

    Note Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.

  • Page 24: Notes On Connecting

    HDMI cable (not supplied) Note Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.

  • Page 25: About Hdmi

    3. Connecting a TV About HDMI connections High-Definition Multimedia Interface (HDMI) is an interface that transmits video and audio signals in digital format. Connecting Sony “BRAVIA” Sync-compatible devices using HDMI cables simplifies operations. HDMI features Digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver.

  • Page 26: Connecting Devices With Hdmi

    ○ 3840 × 2160p @ 29.97/30 Hz (*2) ○ 3840 × 2160p @ 25 Hz (*2) ○ 3840 × 2160p @ 23.98/24 Hz (*2) 1920 × 1080p @ ○ ○ ○ 59.94/60 Hz ○ ○ ○ 1920 × 1080p @ 50 Hz 1920 ×...

  • Page 27: Connecting Devices With Jacks Other Than Hdmi

    DVD recorder Note Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.

  • Page 28: Connecting A Usb

    Audio cable (not supplied) Video cable (not supplied) Coaxial digital cable (not supplied) Hint You can rename each input so that the name can be displayed on the display panel of the receiver. For details, see “Changing the name for each input (NAME IN).” The image quality depends on the connecting jack.

  • Page 29: Digital Audio Formats Supported By The

    [27] Preparation 4. Connecting audio-visual devices and the antennas (aerials) Connecting the antenna (aerial) Connect the supplied FM wire antenna (aerial) to the receiver as illustrated below. Before connecting antenna (aerial), be sure to disconnect the AC power cord (mains lead). FM wire antenna (aerial) (supplied) Note Be sure to fully extend the FM wire antenna (aerial).

  • Page 30: Notes On Connecting

    It is not necessary to connect all of the cables. Connect cables according to the availability of jacks on the connected device. Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.
  • Page 31 TV and AV device. Refer to the operating instructions of the connected device for details. All HDMI jacks on the receiver support bandwidth up to 18 Gbps, HDCP 2.2, ITU-R BT.2020 wide color spaces, 3D, Deep Color (Deep Colour), Audio Return Channel (ARC), and HDR (High Dynamic Range) contents pass-through.

  • Page 32: Inserting Batteries Into The Remote

    23.98/24 Hz 720 × 480p @ 59.94/60 ○ ○ 720 × 576p @ 50 Hz 640 × 480p @ 59.94/60 ○ If you use YCbCr 4:4:4/YCbCr 4:2:2/RGB 4:4:4 or YCbCr 4:2:0 Deep Color (Deep Colour) (10 bit or 12 bit) of these video formats, we recommend you to use Premium High Speed HDMI Cables with Ethernet, which can support bandwidth up to 18 Gbps, and be sure to set the HDMI signal format to [ENHANCED] in the [<HDMI>] menu.
  • Page 33 Press (power) to turn on the receiver. You can also turn on the receiver using (power) on the remote control. To turn off the receiver, press (power) again. Note After you turn off the receiver, [STANDBY] flashes on the display panel. Do not disconnect the AC power cord (mains lead) while [STANDBY] is flashing.

  • Page 34: About Auto

    [34] Preparation 6. Setting up the receiver using Easy Setup Selecting the language You can select the language of messages on the screen. Select [Easy Setup] from the home menu. Select the language you want. Note When the Control for HDMI function on both the receiver and the TV (BRAVIA TV) is turned on, the on-screen display language of the receiver is changed simultaneously when you change the language for the on-screen display of the TV.

  • Page 35: Before You Perform Auto

    Auto Calibration allows you to perform automatic calibration as follows. Check the connection between each speaker and the receiver. Adjust the speaker level. Measure the distance of each speaker from your seating position. (*) Measure the speaker size. (*) Measure the frequency characteristics (EQ). (*) The measurement result is not utilized when [DIRECT] is being used and an analog input is selected.

  • Page 36: Performing Auto

    Place the calibration microphone at your listening position and set it at the same height as your ears. [39] Preparation Performing Auto Calibration 4. Selecting the front speakers You can select the front speakers you want to operate. Be sure to use the buttons on the receiver to perform this operation. Press SPEAKERS on the receiver repeatedly to select the front speaker system you want to operate.
  • Page 37 When the measurement ends, a beep sounds and the screen switches. Select the item you want. Retry: Performs the Auto Calibration again. Save&Exit: Saves the measurement results and exits the setting process. Exit: Exits the setting process without saving the measurement results. For details on the measurement results, see “6.

  • Page 38: Listening To Fm

    Save the measurement results. Select [Save&Exit] in step 3. If a warning message appears Check the warning message and select [OK]. For details on the warning messages, see “List of messages after Auto Calibration measurements.” Hint The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that value does not cause problems.

  • Page 39: Enjoying Video/Sound From The Connected

    AV devices Enjoying movies or audio from an AV device such as a Blu-ray Disc player, CD player, satellite box or game console You can connect AV devices to the receiver to enjoy a wide range of content such as movies and audio.

  • Page 40: Enjoying Sound Of An Arc (Audio Return Channel) Compatible

    The home menu is displayed on the TV screen. Depending on the TV, the home menu may take some time to appear on the TV screen. Select [Watch] or [Listen] from the home menu. The menu item list appears on the TV screen. Select the device you want to play.

  • Page 41: Watching Hdcp 2.2 Copyright-Protected

    Switch the audio input mode. For details, “Switching between digital and analog audio (INPUT MODE).” Note ARC function may work on other devices than those manufactured by Sony. However, operation is not guaranteed. Be sure to turn off the volume of the TV or activate the muting function of the TV.

  • Page 42: Compatible Iphone/Ipod

    For details, refer to the operating instructions of your BLUETOOTH device. A list of detected devices may appear on the BLUETOOTH device display depending on the type of BLUETOOTH device. This receiver is displayed as [STR-DH770]. Select [STR-DH770] on the BLUETOOTH device display.

  • Page 43: Enjoying Audio Content Stored On A Usb

    [49] Enjoying Video and Sound Playing content from a USB device Enjoying audio content stored on a USB device You can enjoy music from a USB device by connecting it to the (USB) port on the receiver. Select [Listen] - [USB] from the home menu. When the USB device is connected, [USB] lights up on the display panel.
  • Page 44 The receiver can recognize Mass Storage Class (MSC) devices (such as flash memory or an HDD). Compatible USB device Mass Storage Class Maximum current Verified Sony USB devices You can use the following Sony USB devices on this receiver: Walkman: NW-A16/A17/A25/A26/A27 NW-W274S NW-WH505...

  • Page 45: Notes On Usb

    When connecting a USB device to the receiver, be sure to connect after the display “Creating Library” or “Creating Database” on the USB device has disappeared. [51] Enjoying Video and Sound Playing content from a USB device Notes on USB devices Do not remove a USB device during operation.

  • Page 46: Presetting Fm Radio

    FM screen A: Frequency indication Shows the frequency of the station which the tuner is receiving. Hint You can also use on the remote control or TUNING +/– on the receiver for tuning. [53] Enjoying Video and Sound Listening to the radio Presetting FM radio stations You can store up to 30 FM stations as your favorite stations.
  • Page 47 A: Frequency indication Shows the frequency of the station which the tuner is receiving. B: Preset station number Shows the preset number which you are selecting. [54] Enjoying Video and Sound Listening to the radio Naming preset stations (NAME IN) You can enter a name up to 8 characters for a preset station.
  • Page 48 Press Enter the frequency. Press to change the digit on the display panel. Press to move to the next digit. You can move the input position backward and forward by pressing Repeat step 3 until the desired frequency is displayed. Note If the tuned frequency is invalid or out of range, [---.-- MHz] appears and then the screen returns to the current frequency.

  • Page 49: Selecting A Sound Field

    repeatedly. [57] Enjoying Video and Sound Enjoying sound effects Selecting a sound field You can select from a variety of sound field modes according to speaker connections or input sources. Press FRONT SURROUND, 2CH/MULTI, MOVIE, or MUSIC to select a sound field you want.
  • Page 50 ◎ ○ (*2) Front Surround FRONT SUR. ◎ ○ Audio Enhancer A. ENHANCER ◎ ○ ○ ○ ○ (*2) ○ Concert Hall HALL ◎ ○ ○ ○ ○ (*2) ○ Jazz Club JAZZ ◎ ○ ○ ○ ○ (*2) ○ Live Concert CONCERT ◎...
  • Page 51 [59] Enjoying Video and Sound Enjoying sound effects Resetting sound fields to the default settings Be sure to use the buttons on the receiver to perform this operation. Turn off the receiver. Hold down MUSIC and press (power) on the receiver. [S.F.
  • Page 52 Level (dB) Frequency (Hz) Bass Treble Press AMP MENU. Select [<EQ>] on the display panel. Select [BASS] or [TREBLE]. Adjust the gain. Note This function does not work in the following cases: [DIRECT] is selected and an analog input is selected. Pure Direct function is activated.
  • Page 53 [63] Using BLUETOOTH Features About BLUETOOTH Features What you can do with BLUETOOTH features Listening to the audio content from a BLUETOOTH device on the receiver You can receive audio from an iPhone/iPod, smartphone or tablet that has a BLUETOOTH function and listen to it via this receiver.
  • Page 54 You can enjoy audio content on a BLUETOOTH device with a one-touch connection using the NFC function. If you are using an NFC-compatible BLUETOOTH device with Android OS 4.0 or earlier, download the “NFC Easy Connect” application to your device. You do not need to install the “NFC Easy Connect”...
  • Page 55 For details, refer to the operating instructions of your BLUETOOTH device. A list of detected devices may appear on the BLUETOOTH device display depending on the type of BLUETOOTH device. This receiver is displayed as [STR-DH770]. Select [STR-DH770] on the BLUETOOTH device display.

  • Page 56: Compatible Bluetooth Version And Profiles

    Controlling the receiver using a smartphone or tablet device (SongPal) SongPal is a dedicated app for operating SongPal-compatible audio devices manufactured by Sony using a smartphone or tablet device. Search for SongPal on Google Play or the App Store and download to your smartphone or tablet device.
  • Page 57 Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) What is “BRAVIA” Sync? “BRAVIA” Sync is an extended function developed by Sony based on the Control for HDMI (*1) function. By connecting “BRAVIA” Sync-compatible devices, such as a TV or a Blu-ray Disc player, using an HDMI cable (*2) (not supplied) you can control the devices with the TV remote control.
  • Page 58 function needs to be turned on separately for the receiver and the connected device. This operation is only available using the display panel on the front of the receiver. Press AMP MENU. Select [<HDMI>] - [CTRL HDMI] on the display panel. Select [CTRL ON].
  • Page 59 Note Depending on the status of the device, the connected device may not turn off. The System Power Off function may work with other devices than those manufactured by Sony, but operation is not guaranteed. [73] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA”...
  • Page 60 Game: MULTI ST. Graphics: MULTI ST. Note The Scene Select function is a function developed by Sony, and cannot be used on other devices than those manufactured by Sony. [76] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) About Home Theatre Control function Setting the receiver, the sound field settings, input switching, etc., can be done by selecting the...
  • Page 61 This function cannot be used when the sound is output from the TV. The Echo Canceling function is a function developed by Sony, and cannot be used on other devices than those manufactured by Sony. [79] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA”...
  • Page 62 AUTO: Gives priority to digital audio signals. If there are more than one digital connection, HDMI audio signals have priority. If there is no digital audio signals, analog audio signals are selected. When TV input is selected, priority is given to Audio Return Channel (ARC) signals.

  • Page 63: Using The Sleep Timer

    [82] Using Other Features Using the sleep timer Using the sleep timer You can set the receiver to turn off automatically after a specified period of time. Press SLEEP. Each time you press SLEEP, the display changes cyclically as follows: 0-30-00 - 1-00-00 - 1-30-00 - 2-00-00 - OFF [SLEEP] lights up on the display panel of the receiver when sleep timer is being used.
  • Page 64 You can operate this receiver using the display panel even if the TV is not connected to the receiver. Press AMP MENU. The menu is displayed on the display panel of the receiver. Press repeatedly to select the menu you want, then press Press repeatedly to select the parameter you want to adjust, then press Press...

  • Page 65: Selecting The Language

    Characters or marks in some languages may not be displayed. [86] Adjusting Settings Easy Setup Setting up the receiver using Easy Setup When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup screen appears on the TV screen.

  • Page 66: Surround Back Speakers Assign

    HIGH/FRONT B terminals. Select [Speaker Setting] from the home menu. Select [Surround Back Speakers Assign]. Set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals. Surround Back Speakers: When using the surround back speaker connection. Bi-Amplifier Speakers: When using the bi-amplifier speaker connection. Front B Speakers: When using the front B speaker connection.

  • Page 67: Selecting The Front Speakers

    Disconnect the headphones. Remove any obstructions between the calibration microphone and the speakers. For accurate measurement, make sure the environment is quiet and free from noise. Note The speakers emit very loud sound during the calibration and the volume cannot be adjusted. Be considerate of your neighbors and any children who are present.

  • Page 68: Performing Auto Calibration

    SP A: Speakers connected to the SPEAKERS FRONT A terminals. SP B (*): Speakers connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals. SP A B (*): Speakers connected to both the SPEAKERS FRONT A and SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals (parallel connection). (None): [SPK OFF] appears on the display panel.
  • Page 69 Press SPEAKERS on the receiver. Change the volume level. Connect headphones. [94] Adjusting Settings Performing Auto Calibration 6. Checking Auto Calibration results To check error codes or warning messages received in Auto Calibration, proceed with the following steps: If an error code appears Check the error and perform Auto Calibration again.
  • Page 70 Select the setting you want. FULL FLAT: Makes the measurement of frequency from each speaker flat. ENGINEER: Sets to “the Sony listening room standard” frequency characteristics. FRONT REF: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
  • Page 71 [97] Adjusting Settings Level Settings Adjusting the speaker level (Level) You can adjust the level of each speaker (front left/right, front high left/right, center, surround left/right, surround back left/right and subwoofer). Select [Speaker Setting] from the home menu. Select [Level]. Select the speaker on the screen for which you want to adjust the speaker level.
  • Page 72 You can set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals. Select [Speaker Setting] from the home menu. Select [Surround Back Speakers Assign]. Set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals. Surround Back Speakers: When using the surround back speaker connection. Bi-Amplifier Speakers: When using the bi-amplifier speaker connection.
  • Page 73 Hint The surround back speakers will be set to the same setting as that of the surround speakers. When the front speakers are set to [Small], the center, surround, and surround back/front high speakers are also automatically set to [Small]. If you do not use the subwoofer, the front speakers are automatically set to [Large].
  • Page 74 frequency. Set the crossover frequency. Note [Crossover Freq] cannot be set when headphones are connected. [Crossover Freq] for the particular speaker cannot be set if [Size] is set to [Large] in the [Speaker Setting] menu. The surround back speakers will be set to the same setting as that of the surround speakers. Hint You can also set the crossover frequency of speakers from the [<SPEAKER>] menu on the display panel.
  • Page 75 Select the setting you want. AUTO: Gives priority to digital audio signals. If there are more than one digital connection, HDMI audio signals have priority. If there is no digital audio signals, analog audio signals are selected. When TV input is selected, priority is given to Audio Return Channel (ARC) signals.
  • Page 76 jack to [BD/DVD]. This operation is only available using the display panel on the front of the receiver. Select the input name you want to assign. Press AMP MENU. Select [<INPUT>] - [A. ASSIGN]. Select the jack you want to assign to the input. Assignable audio input jacks OPT: BD/DVD, SAT/CATV, GAME, SA-CD/CD, VIDEO (*)

  • Page 77: Adjusting The Equalizer

    [108] Adjusting Settings Equalizer Settings Adjusting the equalizer (EQ) You can use the following parameters to adjust the tonal quality (bass/treble level) of the front speakers. This operation is only available using the display panel on the front of the receiver. Level (dB) Frequency (Hz) Bass...
  • Page 78 Note This function works only when [FM] is selected as the input. [110] Adjusting Settings Tuner Settings Naming preset stations (NAME IN) You can enter a name up to 8 characters for a preset station. This operation is only available using the display panel on the front of the receiver. Select the preset number to which you want to assign a name.
  • Page 79 Note This function does not work when [DIRECT] is selected and an analog input is selected. Hint You can also set the Night Mode function on and off by using NIGHT MODE on the receiver. While the Night Mode function is turned on, the bass, treble, and effect levels increase, and [D. RANGE] is automatically set to [COMP.
  • Page 80 Note Be sure to reduce the volume level before you turn this function on or off. The AUTO VOL function may not work, depending on the audio format. This function does not work when [DIRECT] is selected and an analog input is selected. [114] Adjusting Settings Audio Settings Selecting the language of digital broadcasts (DUAL...
  • Page 81 OFF ： The receiver does not turn off when the TV is turned off, regardless of the input of the receiver. Note Depending on the status of the device, the connected device may not turn off. The System Power Off function may work with other devices than those manufactured by Sony, but operation is not guaranteed.
  • Page 82 Select the setting you want. ON: The receiver continuously outputs HDMI signals from the HDMI TV OUT jack when in standby mode. Sony recommends this setting if you are using a TV that is not manufactured by Sony. AUTO: The receiver outputs HDMI signals to the TV from the HDMI TV OUT jack when the TV is turned on while the receiver is in the standby mode.
  • Page 83 TV+AMP: The sound is output from the speaker of the TV and the speakers connected to the receiver. Note Audio signals are not output from the speaker of the TV when [AUDIO OUT] is set to [AMP]. When [TV+AMP] is selected, the sound quality of the playback equipment depends on the TV’s sound quality, such as the number of channels, and the sampling frequency, etc.
  • Page 84 Select the input name you want to apply the setting. Select the setting you want. STANDARD: If you do not receive high resolution 4K signals, select [STANDARD]. ENHANCED: If you want to receive high resolution 4K signals, such as 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc., select [ENHANCED].
  • Page 85 Press AMP MENU. Select [<BT>] - [BT AAC] on the display panel. Select [AAC ON] or [AAC OFF]. AAC ON: AAC audio is available if the BLUETOOTH device supports AAC. AAC OFF: AAC audio is not available. Note When you change this setting, the setting is applied from the next time you connect the BLUETOOTH device.
  • Page 86 Select the setting you want. STBY ON: The receiver switches to standby mode after approximately 20 minutes. STBY OFF Note This function does not work when [FM] is selected as the input. If you use the AUTO STBY function and the sleep timer at the same time, the sleep timer has priority.

  • Page 87: List Of Messages After Auto Calibration Measurements

    After checking the above items and fixing any problems, plug in the AC power cord (mains lead) and turn on the receiver. If the problem persists, consult your nearest Sony dealer. [128] Troubleshooting Error messages List of messages after Auto Calibration measurements Error 30: Headphones are connected to the PHONES jack on the front of the receiver.
  • Page 88 [<SYSTEM>] - [AUTO STBY] is set to [STBY ON] on the display panel. The sleep timer function was activated. [PROTECTOR] was activated. [131] Troubleshooting General Cannot find an available input when connecting several digital devices. You can reassign the COAXIAL/OPTICAL digital audio input jacks to other inputs. See “Using other audio input jacks (A.
  • Page 89 [135] Troubleshooting Image No image appears on the TV screen. Select the appropriate input using the input buttons. Set your TV to the appropriate input mode. Move your audio device away from the TV. Make sure that cables are correctly and securely connected to devices. Press AMP MENU, then set [<HDMI>] - [SIGNAL FMT.] of the selected input to [STANDARD] on the display panel.

  • Page 90: The Display Panel Is Turned Off

    Turn on the receiver, then select the input to which the playing device is connected. If connected to other devices than those manufactured by Sony that support the Control for HDMI function, press AMP MENU, then set [<HDMI>] - [CTRL HDMI] to [CTRL ON] on the display panel.

  • Page 91: There Is Severe Humming Or Noise

    No sound or only a very low level of sound is heard, no matter which device is selected. Check that all connecting cables are inserted to their input/output jacks on the receiver, speakers and the devices. Check that the receiver and all devices are turned on. Check that MASTER VOLUME on the receiver is not set to [VOL MIN].

  • Page 92: There Is No Sound From A Specific Device

    [146] Troubleshooting Sound There is no sound from a specific device. Check that the device is correctly connected to the corresponding audio input jacks. Check that the cable(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the device.

  • Page 93: The Left And Right Sound Is Unbalanced Or Reversed

    function. Press AMP MENU, then set [<HDMI>] - [CTRL HDMI] to [CTRL ON] on the display panel. Make sure that your TV is compatible with the Audio Return Channel function. Make sure that the HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function.

  • Page 94: Standby Mode

    [<HDMI>] - [STBY THRU] to [AUTO] or [ON] on the display panel. Turn on the receiver, then select the input to which the playing device is connected. If connected to other devices than those manufactured by Sony that support the Control for...

  • Page 95: The Fm Reception Is Poor

    HDMI function, press AMP MENU, then set [<HDMI>] - [CTRL HDMI] to [CTRL ON] on the display panel. [156] Troubleshooting Sound The sound is output from both the receiver and the TV. Mute the sound of the receiver or the TV. [157] Troubleshooting Tuner The FM reception is poor.

  • Page 96: The Sound Is Distorted

    [161] Troubleshooting Tuner The RDS information that you want does not appear (for European and Asia-Pacific models only). The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question. [162] Troubleshooting iPhone/iPod The sound is distorted.

  • Page 97: Playback Does Not Start

    [166] Troubleshooting USB devices Playback does not start. Turn off the receiver, reconnect the USB device, and then turn on the receiver. Connect a compatible USB device. Select [USB] and select a folder/track, then press to start playback. [167] Troubleshooting USB devices A USB device cannot be connected to the USB port.

  • Page 98: Pairing Cannot Be Done

    The audio file is a multiple track audio file. Some AAC files may not be played correctly. WMA files in Windows Media Audio Lossless and Professional formats cannot be played. USB devices formatted with file systems other than FAT16, FAT32 or NTFS are unsupported (*).

  • Page 99: Severe Humming Or Noise

    heard on the receiver. Turn up the volume on your BLUETOOTH device first, and then adjust the volume using + (or MASTER VOLUME on the receiver). [175] Troubleshooting BLUETOOTH device Severe humming or noise. If there are obstructions between the receiver and your BLUETOOTH device, remove them or move the receiver and/or device avoid them.

  • Page 100: Connected To The Receiver

    TV sound cannot be heard from the speakers connected to the receiver. Make sure [<HDMI>] - [CTRL HDMI] is set to [CTRL ON] on the display panel. Make sure [<INPUT>] - [INPUT MODE] for the TV is set to [AUTO] on the display panel. Make sure your TV supports the ARC function.

  • Page 101: Customer Support Websites

    MICROVAULT is a trademark of Sony Corporation. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 102 All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified. How to connect speaker cables Connect speaker cables as illustrated below. Strip the jacket to 10 mm (13/32 in) at each end of the speaker cables. Confirming active subwoofer setup When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to activating the subwoofer.
  • Page 103 These bring the exciting and powerful sound of movie theaters into your home. HD-D.C.S.: HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on the precise response measurement data of a mastering studio.
  • Page 104 your home. Audio Enhancer (A. ENHANCER): Reproduces a clear enhanced sound from your portable audio device. This mode is ideal for MP3 and other compressed audio formats. Concert Hall (HALL): Reproduces the acoustics of a concert hall. Jazz Club (JAZZ): Reproduces the acoustics of a jazz club.
  • Page 105 FULL FLAT, ENGINEER, FRONT REF, OFF Level settings [<LEVEL>] Test Tone [TEST TONE] (*2) OFF, AUTO XXX (*3) Front left speaker level [FL LEVEL ] (*2) FL -10.0 dB to FL +10.0 dB (0.5 dB interval) Front right speaker level [FR LEVEL] (*2) FR -10.0 dB to FR +10.0 dB (0.5 dB interval) Center speaker level [CNT LEVEL] (*2) CNT -10.0 dB to CNT +10.0 dB (0.5 dB interval)
  • Page 106 Surround speakers crossover frequency [SUR CROSS] (*5) CROSS 40 Hz to CROSS 200 Hz (10 Hz interval) Front high speakers crossover frequency [FH CROSS] (*5) CROSS 40 Hz to CROSS 200 Hz (10 Hz interval) Input settings [<INPUT>] Input Mode [INPUT MODE] AUTO, OPT, COAX, ANALOG Naming inputs [NAME IN] For details, see “Changing the name for each input (NAME IN).”...
  • Page 107 Version display [VER. X.XXX] (*8) You can select this setting only when you have performed Auto Calibration and saved the settings. Some parameters or settings may not be available depending on the speaker pattern setting. XXX represents a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW). You can only select this parameter if [SP PATTERN] is not set to a pattern with surround back and front high speakers.

Table of Contents