Parts And Controls - Sony STR-DH770 Operating Instructions Manual

Parts and Controls

Receiver
Front panel
  (power) (page 27)
 Power indicator
 SPEAKERS (page 29)
 TUNING MODE, TUNING +/–
Operates a tuner function.
Press TUNING +/– to scan a station.
 NFC sensor
 2CH/MULTI, MOVIE, MUSIC (page 32,
33)
 Display panel (page 10)
 NIGHT MODE
 CONNECTION
Operates the BLUETOOTH function.
 DISPLAY
 DIMMER
Adjusts the brightness of the display panel in 3
levels.
 Remote control sensor
Receives signals from remote control.
 PURE DIRECT
The indicator above the button lights up when
the Pure Direct function is activated.
 MASTER VOLUME (page 31)
 INPUT SELECTOR (page 32)
  (USB) port
PAIRING BLUETOOTH
 CALIBRATION MIC jack (page 30)
 PHONES jack
Connect headphones here.
Power indicator
Green: The receiver is turned on.

Amber: The receiver is in standby mode,

and you have set one of the following:
 "CTRL HDMI" is set to "CTRL ON".
 "BT STANDBY" is set to "STBY ON"*.
 "STBY THRU" is set to "ON" or "AUTO".
The indicator turns off when the receiver is in
standby mode and:
 "CTRL HDMI" is set to "CTRL OFF".
 "BT STANDBY" is set to "STBY OFF".
 "STBY THRU" is set to "OFF".
* The indicator lights up in amber only if a device
has been paired with the receiver. If no devices are
paired with the receiver, the indicator turns off.
GB
9