Input Buttons - Sony STR-DH770 Operating Instructions Manual

Remote control
  (power)
Turns the receiver on or sets it to the standby
mode.
Saving power in standby mode
Check that you have made the following
settings:
 Set "CTRL HDMI" to "CTRL OFF" in the
"<HDMI>" menu.
 Set "BT STANDBY" to "STBY OFF" in the "<BT>"
menu.
 Set "STBY THRU" to "OFF" in the "<HDMI>"
menu.
SLEEP
Sets the receiver to turn off automatically at a
specified time.
GB
12

 Input buttons

Selects the input channel connected to the
device you want to use. When you press any of
the input buttons, the receiver turns on.
 FRONT SURROUND, 2CH/MULTI,
MOVIE, MUSIC
Selects a sound field.
NIGHT MODE
Activates the Night Mode function.
PURE DIRECT
Activates the Pure Direct function.
 DISPLAY
Displays information on the display panel.
AMP MENU
Displays the menu on the display panel to
operate the receiver.
BACK
Returns to the previous menu or exits a menu
or on-screen guide that is displayed on the TV
screen.
PAIRING
Sets the receiver to pairing mode.
(enter), / / /
Press , , , to select the menu items.
Then, press to enter the selection.
 HOME
Displays the home menu on the TV screen.
/ (previous/next),
 (play/pause)*,  (stop)
Skip, play, pause, stop operation.
PRESET +/–
Selects preset stations or channels.
MEMORY
Stores a station during tuner operation.


(volume) +*/–
Adjusts the volume level of all speakers at the
same time.
 (muting)
Turns off the sound temporarily. Press the
button again to restore the sound.
* The /MEMORY and
dots. Use the tactile dots as reference when
operating the receiver.
Note

The above explanation is intended to serve as
examples.

Depending on the model of your connected
device, some functions explained in this section
may not work with the supplied remote control.

+ buttons have tactile