Brother HL-S7000DN User Manual page 92

General Information
Network Menu (continued)
Submenu 1 Submenu 2
WLAN WLAN Status
(Continued) (Appears only
when
WLAN Enable
is On and
Wired Enable
is Off.)
MAC Address -
Set to Default Restores the wireless network settings of the internal print server to the factory default.
WLAN Enable -
Security IPsec
Restores all network settings of the internal print server to the factory default.
Network
Reset
The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually
enter an IP address from the machine's control panel.
Reset Menu
Display Shows
Network
Factory Reset
Menu Selections
Status
Signal
Channel
Speed
SSID
Comm. Mode
-
Description
Restores all network settings of the internal print server to the factory default.
Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
Options
Active(11n) /
Active(11b) /
Active(11g) /
Wired LAN Active /
WLAN OFF / AOSS Active /
Connection Fail
Strong / Medium / Weak /
None
-
-
-
Ad-hoc / Infrastructure
-
On / Off*
On / Off*
Descriptions
Shows the wireless Ethernet
link status.
Shows the signal condition.
Shows the channel in use when
Status is Active.
Shows the connecting speed
when Status is Active.
Shows SSID [uses a maximum
of 32 digits and characters 0-9,
a-z and A-Z in ASCII values]
Shows the current
Communication Mode.
Shows the MAC address of the
machine.
Turns the wireless interface on
or off.
IPsec is an optional security
feature of the IP protocol that
provides authentication and
encryption services. We
recommend that you contact
your network administrator
before changing this setting.
3
86