Brother HL-S7000DN User Manual page 115

Routine Maintenance
d
Check the print quality on the test page.
If you print documents that contain mostly graphics, check the black bar (1).

 If you print documents that contain mostly text, check the characters and numbers (2).
e
The LCD asks you if the print quality is OK.
Do one of the following:
 If the printout looks clear and visible, press 1 to select Yes to finish the cleaning. The machine will
return to Ready mode.
 If the printout has a quality problem, press 2 to select No. The machine will start cleaning and print
the test page again. Repeat steps d and e until the print quality is improved.
If you clean three times and the print has not improved, the LCD will ask you to start Advanced Cleaning.
To start Advanced Cleaning, press 1 to select Yes then go to step d in Advanced Cleaning. To finish
the cleaning, press 2 to select No.
Advanced Cleaning
Cleans the print head more thoroughly than Cleaning Wizard. Choose this option if Cleaning Wizard
does not clean the print head adequately, when the print appears thin, or when there are smudges.
a
Press Menu.
b
Press a or b to choose Maintenance. Press OK.
6pt
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghij
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefg
0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123
8pt
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOP
012345678901234567890123456789012345678901234567890123456789012345678901234
10pt
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEF
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDE
01234567890123456789012345678901234567890123456789012345678901
1
2
5
5
109