Brother HL-S7000DN User Manual page 91

General Information
Network Menu (continued)
Submenu 1 Submenu 2
WLAN TCP/IP
Setup Wizard -
WPS/AOSS
WPS w/PIN
Code
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Auto* / Static / RARP /
Boot Method
BOOTP / DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
Node Name BRWXXXXXXXXXXXX
Auto* / Static
WINS Config
(Primary)
WINS Server
000.000.000.000
(Secondary)
000.000.000.000
(Primary)
DNS Server
000.000.000.000
(Secondary)
000.000.000.000
0 / 1 / 2 / 3* / ... / 32767
IP Boot Tries
On* / Off
APIPA
On / Off*
IPv6
-
- -
- -
Descriptions
Chooses the IP method that
best suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
1
Enter the Node name.
Chooses the WINS
configuration mode.
Specifies the IP address of the
primary or secondary WINS
server.
Specifies the IP address of the
primary or secondary DNS
server.
Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method is set to any
setting except Static.
Automatically allocates the IP
address from the link-local
1
address range.
Enables or Disables the IPv6
protocol.
Configures the wireless
network settings using the
setup wizard.
Configures the wireless
network settings using WPS or
AOSS™ method.
Configures the wireless
network settings using WPS
with a PIN code.
3
85