Brother HL-S7000DN User Manual page 27

Printing Methods
Note
If you try to print when the paper adjustment lever for duplex printing is not correctly set for the paper size
being used, the LCD will show DX Lever Error and the machine will stop printing. If this happens, move
the lever to the correct paper size position.
b
Choose the following settings from each menu of the printer driver.
 Paper Size
A4
 Media Type
Plain Paper
 Paper Source
Tray1
Tray ID 1
 Duplex / Booklet
Duplex
 Duplex Type in Duplex Settings
There are four options for each orientation. (See Duplex / Booklet uu page 31.)
 Binding Offset in Duplex Settings
You can specify the offset for binding. (See Duplex / Booklet uu page 31.)
Note
• You should use plain paper, recycled paper or thin paper. Do not use bond paper.
• The name of options in the drop-down lists may vary depending on your operating system and its version.
For other settings, see Driver and Software in Chapter 2.
c
Send the print data to the machine. The machine will print on both sides of the paper automatically.
Note
• Do not place your hands in the paper exit area.
• Do not place anything in the printed pages exit path.
• Wait until all the printed pages have exited the machine before picking them up.
Letter Legal
Recycled Paper Thin Paper
MP Tray Tray2
(if available)
Tray ID 2 Tray ID 3
Folio
Tray3 Tray4
(if available) (if available)
Tray ID 4
1
21