Printing A Document - Brother HL-S7000DN User Manual

Driver and Software

Printing a document

When the machine receives data from your computer, it begins printing by picking up paper from the paper
tray. The paper tray can feed many types of paper. (See Paper capacity of the paper trays uu page 3.)
a
From your application, choose the Print command.
If any other printer drivers are installed on your computer, choose Brother HL-S7000DN series as your
printer driver from the Print or Print Settings menu in your software application, and then click OK or Print
to begin printing.
b
Your computer sends the data to the machine. The Data LED will blink and the LCD will show
Printing. The output paper stopper will also blink if it is in the default A4/Letter position.
c
When the machine finishes printing all the data, the Data LED and output paper stopper will stop blinking.
Note
• You can choose the paper size and orientation in your application software.
• If your application software does not support your custom paper size, choose the next largest paper size.
Then adjust the print area by changing the right and left margins in your application software.
2
2
25