P-Mode Programming; Default Program - Samsung ER 5200 Operator's And Programming Manual

P-Mode Programming

Default Program

The ER-5200/5240 arrives with a default or generic program already installed. Program options are set
to 0 (Zero), unless otherwise noted, which means the machine can be operated immediately after a
RAM clear procedure is performed.
For example:



ER 5200/5240 Electronic Cash Register
All keyboard PLUs are nontaxable and open, without entry limits by default status
programming of "000000000".
All system options are set to 0 in default programming, unless otherwise noted. Change
only the options that will deviate from default programming. There is no need to re-enter an
option status of 0, since 0 is its original setting.
All programming (unless otherwise noted) is done with the control lock in the P position.
Each section details a specific area of register programming.
P-Mode Programming • 89