Print Option Programming - Samsung ER 5200 Operator's And Programming Manual

Print Option Programming

Refer to the "Print Option Table" to review the print options. Read each option carefully to determine
if you wish to make any changes.
NOTE: Because after clearing memory all options settings are automatically set to 0, and
because your most likely option selections require a status setting of 0, you do not need to
program this section unless you wish to change the default status.
Programming a Print Option
Print Option Flowchart
4 0
114 • P-Mode Programming
1. Turn the control lock to the P position.
2. Enter 4 0, press the SBTL key.
3. Enter a print option address and press the X/TIME key.
4. Enter the number representing the status you have selected, or if there is more than one
decision to be made in an address, add the values representing your choices for each
decision and enter the sum. Press the SBTL key.
5. Repeat from step 3 for each print option you wish to change.
6. Press the CASH key to end print option programming.
SBTL
Option #
Repeat for each Print
Option
X/TIME SBTL
Status
ER 5200/5240 Electronic Cash Register
CASH