Program 250 - Plu Stock Amount Programming - Samsung ER 5200 Operator's And Programming Manual

Program 250 - PLU Stock Amount Programming

With this program, you can you can add stock to the PLU sales counters for PLUs you have designated
as stock PLUs. See "Program 100 - PLU Status Programming" to set option N5 to set stock status.
The stock number set here can be the amount of stock that is being added to the current level, or
optionally, it can be the new total stock level. See option #18 in "System Option Programming" to set
this option.
ER 5200/5240 Electronic Cash Register
1. Turn the control lock to the P position.
2. To begin the program, enter 2 5 0, press the SBTL key.
2 5 0
3. Select the PLU or PLUs you wish to program in one of the following ways:

Press a PLU key on the keyboard, or
PLU

If sequential PLUs are to receive the same status, press the first PLU key and then
press the last PLU key, or
PLU PLU

Enter the number of the PLU and press the PLU key, or

Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME key.
Stock Amount
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
PLU
X/TIME
PLU
P-Mode Programming • 101