Program 701 - Financial Report Descriptor Programming - Samsung ER 5200 Operator's And Programming Manual

Program 701 - Financial Report Descriptor Programming

The Financial Report selection allows you to reprogram the descriptors that appear with the Financial
Report totals and counters. For example, the first total on the financial report "+PLU TTL" represents
the total of all positive PLU entries. You might wish to re-label this total to say "FOOD SALES". You
can reprogram any of the Financial Report totals listed here with any 12-character descriptor.
ER 5200/5240 Electronic Cash Register
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 1, press the SBTL key.
7 0 1
3. Refer to the chart on the next page and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
X
4. If you are programming using an alpha keyboard overlay, type up to 12 descriptors on the
overlay and press the SBTL key.
Type up to 12
descriptor keys
If you are programming using descriptor codes, enter up to 12 three-character codes and
press the SBTL key.
Enter up to 12 three-
character codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
SBTL
P-Mode Programming • 153