Update Boot Area - Samsung ER 5200 Operator's And Programming Manual

Update Boot Area

Note: There are two parts to the firmware program: Boot area and Program area. In most
cases, you will only need to update the program area. You will be specifically notified when Boot
area updates are required.
ER 5200/5240 Electronic Cash Register
1. Connect the Serial Cable From ECR to PC.
2. At the register, turn the control lock to the S position.
3. Turn the power switch to the OFF position.
4. Press and hold the CASH key.
5. While continuing to hold the CASH key, turn the power switch to the ON position.
(The display will show nothing and the error tone will sound.) Release the CASH
key.
6. Press CLEAR.
7. At the PC, execute the program "Download.exe". The Download dialog box
displays.
8. Select the appropriate com port connection at your PC at the PORT# option buttons.
9. Click SEL. find the folder where the update files are located and select ER5200.bin
or ER5240.bin.
10. Select Boot area only in the Select One option buttons.
11. Press OK Button. The download takes about 15 seconds; the scroll bar will track the
progress of the download.
12. The message Completed displays. Click OK and the Download program will close.
At the register, turn the power switch to OFF.
S-Mode Programming • 87