Program 110 - Plu Auto Tare Programming - Samsung ER 5200 Operator's And Programming Manual

Program 110 - PLU Auto Tare Programming

98 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 1 1 0, press the SBTL key.
1 1 0
3. Select the PLU or PLUs you wish to program in one of the following ways:

Press a PLU key on the keyboard, or
PLU

If sequential PLUs are to receive the same status, press the first PLU key and then
press the last PLU key, or
PLU PLU

Enter the number of the PLU and press the PLU key, or

Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
4. Enter a value (1-5) to indicate the number of the preprogrammed tare weight you want to
automatically subtract when the PLU is used for scale entry (using an optional scale), and
then press the X/TIME key. Enter 0 to disable automatic tare subtraction.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
PLU
ER 5200/5240 Electronic Cash Register
PLU