Program 801 - Drawer Assignment; Program 810 - Clerk Descriptor Programming - Samsung ER 5200 Operator's And Programming Manual

Program 801 - Drawer Assignment

Program 810 - Clerk Descriptor Programming

Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To enter descriptors by three digit alpha character codes you must
add a value of '1' to system option #25 (See "System Option Programming" on page 108).
148 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0 1, press the SBTL key.
8 0 1
3. Enter the number (1-10) of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter a drawer assignment (0 (no drawer), 1 (default), or 2); press the SBTL key.
Enter 0, 1 or 2
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize
the program.
CASH
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SBTL key.
8 1 0
3. Enter the number (1-10) of the clerk you wish to program; press the X/TIME key.
X/TIME
4. If you are programming using an alpha keyboard overlay, type up to 12 descriptors on the
overlay and press the SBTL key.
Type up to 12
descriptor keys
If you are programming using descriptor codes, enter up to 12 three-character codes and
press the SBTL key.
Enter up to 12 three-
character codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
SBTL
SBTL
SBTL
ER 5200/5240 Electronic Cash Register