Program 400 - Plu Delete Programming - Samsung ER 5200 Operator's And Programming Manual

Program 400 – PLU Delete Programming
NOTE: To delete a PLU, all totals for the PLU must be cleared from Z reports (including Stock
and PLU reports.)
106 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 4 0 0, press the SBTL key.
4 0 0
3. Select the PLU or PLUs you wish to program in one of the following ways:

Press a PLU key on the keyboard, or
PLU

Press the first PLU keys that are to delete and Press the last PLU keys, or
PLU PLU

Enter the number of the PLU you wish to delete and press the PLU key, or

Enter the number of the first PLU in a range you wish to delete and press the PLU
key. Enter the last number in the range; press the PLU key.
4. Press X/TIME key.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
PLU
PLU
ER 5200/5240 Electronic Cash Register
PLU