Table of Contents
Advertisement
The Output Is Too Light
Problem
The output is too light.
NOTE:
•
If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
113
Troubleshooting
Action
The toner cartridge may be low or need to be replaced. Confirm the
amount of toner in the toner cartridge.
1
Check the Estimated Toner Level on the Consumables tab in the
Printer Status window.
2
Replace the toner cartridge as necessary.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
See also:
• "Usable Print Media" on page 61
Try changing the Paper Type setting in the print driver.
On the Paper/Output tab in Printing Preferences of the print driver,
change the Paper Type setting.
Disable Toner Saving Mode in the print driver.
1On the Graphics tab in Printing Preferences of the print driver,
ensure that the Toner Saving Mode check box is not selected.
Advertisement
Table of Contents
