Operator Panel
The operator panel has one button and two light-emitting diodes (LEDs) that show the status of the
printer.
1
(Error) LED
•
Indicates an error occurred.
2
(Ready) LED
•
Indicates the printer status such as ready to print.
3
Button
•
Press this button to start duplex printing after loading paper.
•
Press and hold this button during printing to cancel a print job.
•
Press this button to exit the Power Saver mode.
•
Press this button to continue a pending job in an error state such as misfeeding after checking
that paper is loaded properly.
•
Press this button after replacing the toner cartridge.
The LEDs provide information on the status of the printer.
LED
Error
Ready
See also:
• "Understanding the Operator Panel Lights" on page 95
33
Basic Operation
1
2
3
Status
Umber on
Umber blinks
Green on
Green blinks
Green blinks slowly
An error occurred.
A fatal error occurred.
The printer is ready to print.
The printer is receiving, printing, or waiting for print data.
The printer is in the Power Saver mode.
Condition