Table of Contents
Advertisement
Checking Page Counts
The total number of printed pages can be checked by printing a System Settings page. The total
number of printed pages is shown on the Print Volume section, classified by paper sizes.
Single side print (including Multiple-Up) is counted as one job, and 2-sided print (including Multiple-
Up) is counted as two. During 2-sided printing, if an error occurs after one side is printed properly, it is
counted as one.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of
the application. In this case, the blank page is counted as one page. However, when doing 2-sided
printing for odd number of pages, the blank page inserted to the rear side of the last odd page is not
counted.
NOTE:
•
Refer to
"Printing a System Settings Page" on page 91
•
You can also confirm the toner counter reset by printing a System Settings page. When the toner counter is
reset, each number of paper sizes on the Print Volume section will be also reset. Resetting the toner counter
is possible from the Printer Setting Utility.
151
Maintenance
for details on how to print a System Settings page.
Advertisement
Table of Contents
