Wireless Local Area Network (Wlan) Card; Removing A Wlan Card - Dell Vostro 1710 Service Manual

Back to Contents Page

Wireless Local Area Network (WLAN) Card

Dell™ Vostro™ 1710
Service Manual

Removing a WLAN Card

Replacing a WLAN Card
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that
shipped with your computer.
Your computer supports a WLAN card. If you ordered a WLAN card with your computer, the card is already installed.
Removing a WLAN Card
1. Follow the procedures in
2. Turn the computer upside down.
3. Loosen the eight screws that secure the memory cover. (See
memory cover.)
4. Remove the memory cover and set it aside.
5. Remove the M2 x 3-mm screw that secures the WLAN card.
1 M2 x 3-mm screw (1)
3 antenna cables (2)
6. Slide the WLAN card at a 45-degree angle out of its connector.
7. Rotate each antenna cable until it is positioned away from the WLAN card and then pull gently on the cable to
disconnect it.
Before Working on Your
2
Computer.
Removing a Memory Module
WLAN card
for an illustration of the