shipped with your computer.
This procedure assumes that you have completed the removal procedure
1. Connect the optical drive cable to the connector on the system board.
2. Replace the M2.5 x 5-mm screw to secure the optical drive to the system board.
3. Replace the palm rest (see
4. Replace the display assembly (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Replace the WLAN card (see
8. Replace the hard drive cover. See
Back to Contents Page
Replacing the Palm
Rest).
Replacing the Display
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing a WLAN
Card).
Removing the Hard Drive
Removing the Optical
Assembly).
for an illustration of the hard drive cover.
Drive.