Replacing The Fingerprint Reader - Dell Vostro 1710 Service Manual

5 fingerprint reader connector with retaining bracket 6 fingerprint reader

Replacing the Fingerprint Reader

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your
computer.
NOTICE: Ensure that the touch pad cable and the cable for the internal card with Bluetooth® wireless
technology are properly routed before snapping the palm rest into place.
This procedure assumes that you have completed the removal procedure
1. Position the fingerprint reader on the underside of the palm rest.
2. Connect the fingerprint reader cable connector to the fingerprint reader connector and rotate the retaining bracket
downward to secure the cable.
3. Replace the fingerprint reader cover and replace the M2 x 3-mm screw that secures the cover to the palm rest.
4. Replace the palm rest (see
5. Replace the display assembly (see
6. Replace the keyboard (see
7. Replace the hinge cover (see
8. Replace the WLAN card (see
9. Replace the hard drive cover. See
Back to Contents Page
Replacing the Palm Rest).
Replacing the Display
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing a WLAN Card).
Removing the Hard Drive
Removing the Fingerprint
Assembly).
for an illustration of the hard drive cover.
Reader.