Chapter 3. Quick Installation Guide; Tcp/Ip Configuration - TP-Link TL-WR810N User Manual

Chapter 3.
Quick Installation Guide
This chapter will show you how to configure the basic functions of your TL-WR810N 300Mbps
Wi-Fi Pocket Router/AP/TV Adapter/Repeater using Quick Setup within minutes.

3.1 TCP/IP Configuration

The default domain name of the TL-WR810N 300Mbps Wi-Fi Pocket Router/AP/TV
Adapter/Repeater is http://tplinkwifi.net, the default IP address is 192.168.0.254, and the default
Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use
all the default values for description.
Connect the local PC to the LAN port of the Router. And then you can configure the IP address for
your PC as the following steps:
1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If
you need instructions as to how to do this, please refer to
2) Then the built-in DHCP server will assign IP address for the PC.
Then connect to the Router through wireless connection following the steps below:
1) Click the icon
default SSID of the Router. Click Connect.
TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
at the bottom of your desktop. Click refresh button, and then select the
Appendix B: Configuring the
- 9 -
PC.