Wireless Security - TP-Link TL-WR810N User Manual

Enable Wireless Radio - The wireless radio of the Router can be enabled or disabled to

allow wireless stations access. If enabled, the wireless stations will be able to access the
Router. Otherwise, wireless stations will not be able to access the Router.
Survey - Click this button, you can search the AP which runs in the environment.

Click Survey button on the Wireless page as shown in Figure 6-6, and then AP List page will
appear as shown in Figure 6-7. Find the SSID of the Access Point you want to access, and click
Connect in the corresponding row. For example, the third item is selected. The target network's
SSID will be automatically filled into the corresponding box which is shown as the Figure 6-6.
Be sure to click the Save button to save your settings on this page.

Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
Near the center of the area in which your wireless stations will operate.

 In an elevated location such as a high shelf.
Away from the potential sources of interference, such as PCs, microwaves, and cordless

phones.
Away from large metal surfaces.

2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.

6.5.2 Wireless Security

Choose menu "Wireless → Wireless Security", and then you can configure the security
settings of your wireless network.
There are three wireless security modes supported by the Router: WPA/WPA2-Personal,
WPA/WPA2-Enterprise and WEP (Wired Equivalent Privacy).
TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 6-7 AP List
- 136 -