TP-Link TL-WR810N User Manual page 49

TL-WR810N
Connect on Demand - In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (Max Idle Time) and be re-established
when you attempt to access the Internet again. If you want your Internet connection
keeps active all the time, please enter "0" in the Max Idle Time field. Otherwise, enter
the number of minutes you want to have elapsed before your Internet access
disconnects.
 Connect Automatically - The connection can be re-established automatically when it
was down.
 Time-based Connecting - The connection will only be established in the period from the
start time to the end time (both are in HH:MM format).

Note:
Only when you have configured the system time on "System Tools → Time" page, will the
Time-based Connecting function can take effect.
Connect Manually - You can configure the router to make it connect or disconnect

manually. After a specified period of inactivity (Max Idle Time), the router will disconnect
from your Internet connection, and you will not be able to re-establish your connection
automatically as soon as you attempt to access the Internet again. To use this option,
check the radio button. If you want your Internet connection to remain active at all times,
enter "0" in the Max Idle Time field. Otherwise, enter the number of minutes that you
wish to have the Internet connecting last unless a new link is requested.
Click the Connect button to connect immediately. Click the Disconnect button to disconnect
immediately.
Caution: Sometimes the connection cannot be terminated although you specify a time to
Max Idle Time because some applications are visiting the Internet continually in the
background.
If you want to do some advanced configurations, please click the Advanced button, and the
page shown in Figure 4-11 will then appear:
300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
- 35 -