Quick Installation Guide
4G LTE Mobile Wi-Fi
Install the SIM Card and Battery
Connect to the Internet
1
Remove the back cover.
M7300
4
Note down the default SSID and
Wireless Password.
SSID:
TP-Link_XXXX
Wireless Password:
XXXXXXXX
1
Press and hold the Power button
If not, please refer to FAQ > Q3.
2
On your wireless device or smart device, use the SSID and the Wireless Password you have noted down to connect to the Mobile Wi-Fi.
<
Settings
Wi-Fi
Wi-Fi
Choose a network...
TP-Link_XXXX
TP-Link_Extender_5GHz
hello
· By default, Power Saving is enabled and the Mobile Wi-Fi will turn off the Wi-Fi when no wireless devices are connected to it for 10 minutes.
!
Press the
button to resume the Wi-Fi connection.
2
Insert the SIM card.
!
5
Replace the cover.
until all the LEDs are lit. Wait until the Internet LED
Enjoy!
SSID:
TP-Link_XXXX
Wireless Password:
XXXXXXXX
3
Install the provided battery.
· Nano SIM card must
be converted using
the provided SIM card
tray.
· The SD card slot can
be used for storage
and media sharing.
· SIM card and SD card
are not provided.
turns solid green.