TP-Link M7450 Quick Installation Manual

Quick Installation Guide

LTE-Advanced Mobile Wi-Fi

Install the SIM Card and Battery

Connect to the Internet

1 2
Remove the back cover.
4 5
Install the provided battery.
1
Press and hold the button until the welcome screen appears.
To power off, press and hold the
!
until the "Power Off" message appears on the screen.
2
You will find the following messages on the screen, and then follow the instructions to connect to the Mobile Wi-Fi.
Press the
the
SSID and Password shown on the screen to
connect to your Mobile Wi-Fi.
0
MB
Device Info
0.0
K/S
SSID: TP-Link_XXXX
Carrier Name Password: XXXXXXXX
Login Address:
http://tplinkmifi.net
If other messages display on the screen, please refer to FAQ > Q3.
! ·
By default, Power Saving is enabled and the Wi-Fi will be turned off when no wireless devices are connected to the Mobile Wi-Fi for 10 minutes.
·
Press the or button to resume the Wi-Fi connection.
3
Slide and lift up the SIM card slot cover.
Replace the cover.
button
button twice and then press
button to select Device Info. Use the
< Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
Other...
Insert the SIM card and slide the cover back to lock.
· A nano SIM card must
!
be converted using the
provided SIM card tray.
· The micro SD card slot
can be used for storage
and media sharing.
· The SIM card and SD
card are not provided.
Enjoy!