Wireless; Wireless Settings - TP-Link TL-WR810N User Manual

TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
2. If you select the type of Smart IP (DHCP), the DHCP server in this device will not startup.
3. If the new IP address you set is not in the same subnet, the IP Address pool in the DHCP
server will not take effect, until they are re-configured.
4. This device will reboot automatically after you click the Save button.
Click the Save button to save your settings.

Note:
When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled.

5.7 Wireless

Figure 5-9 Wireless menu
There are six submenus under the Wireless menu (shown in Figure 5-9): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced, Wireless Statistics and
Throughput Monitor. Click any of them, and you will be able to configure the corresponding
function.

5.7.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
Figure 5-10 Wireless Settings - AP
- 105 -