Address Reservation - TP-Link TL-WR810N User Manual

7.6.3 Address Reservation

Choose menu "DHCP → Address Reservation", and then you can view and add a reserved
address for clients via the next screen (shown in Figure 7-17).When you specify a reserved IP
address for a PC on the LAN, that PC will always receive the same IP address each time when it
accesses the DHCP server. Reserved IP addresses should be assigned to the servers that
require permanent IP settings.
 MAC Address - The MAC address of the PC for which you want to reserve an IP address.
Reserved IP Address - The IP address reserved for the PC by the Router.

Status - The status of this entry either Enabled or Disabled.

 Modify - To modify or delete an existing entry.
To Reserve an IP address:
1. Click the Add New... button. Then Figure 7-18 will pop-up.
2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
To modify an existing entry:
1. Click the Modify in the entry you want to modify.
2. Modify the information.
3. Click the Save button.
Click the Delete in the entry you want to delete to delete an existing entry.
Click the Enable/Disable All button to make all entries enabled/disabled
TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 7-17 Address Reservation
Figure 7-18 Add or Modify an Address Reservation Entry
- 174 -