Foscam FI9818W User Manual page 43

Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click "OK" to apply changes.
Step 3: Wait around 10 seconds, you'll see that the camera's LAN IP address has changed. In our
example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN
IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not
change even if the camera is powered off and back on, the camera will remain on this LAN IP address.
This is very important that a static LAN IP address is set, or you may have problems later with remote
access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP
address. Make sure you set a static LAN IP address!
Shenzhen Foscam Intelligent Technology Co., Limited 41
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168